TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Be sure your post is relevant to the current discussion.  Create a new topic within the appropriate board if you are unsure.

unusal use of TC
Read 1312 times
* January 04, 2017, 04:39:08 PM
OK, not the normal type of image posted, just fancied a change from the norm originally was just going to be a Salvador Dali image but then I changed it a bit,  image is screen capture as TC wouldn't save it properly to jpg nor png...

Oh, the bottom left of middle shows a problem with inserted camera rendering in latest version, different boxes or part of boxes disappear leaving jagged edges, I have to say inserting camera is a bit buggy..   

Logged


* January 04, 2017, 05:07:37 PM
#1
I like it!

Henry H

Logged


January 04, 2017, 05:29:51 PM
#2
Nice job Andy. I saw the Dali likeness even before I read your post. The clocks were a giveaway for me.


January 05, 2017, 02:01:30 AM
#3
 v.cool! 8)

Regards Tim

Logged
You can design without engineering, but you cannot engineer without design.
Testing/using with Win 10 and various TurboCAD 64-bit versions.


* January 05, 2017, 04:51:47 AM
#4
OK, not the normal type of image posted, just fancied a change from the norm originally was just going to be a Salvador Dali image but then I changed it a bit,  image is screen capture as TC wouldn't save it properly to jpg nor png...

Oh, the bottom left of middle shows a problem with inserted camera rendering in latest version, different boxes or part of boxes disappear leaving jagged edges, I have to say inserting camera is a bit buggy..   

Cool, Andy :)
Did you adjust the 'Tile" area when saving as an image

Logged
"What do I know, I'm still learning"..
Windows 7 64 bit HP > on a stock HP laptop with 4gb-2.4 GHz.Turbocad 2016-2017, TurboCad Platinum 21(Best working version,IMHO) Using Lightworks for reliability/stability and testing redsdk, Anilab lab 5, Renditioner Pro V3. ATI Mobility Radeon HD 4500/5100


* January 05, 2017, 10:45:30 AM
#5
Thanks all for having a look.

Hi Dean, I couldn't remember what to set tiles at, so I think I tried 25 and then 100, don't know if this was too small a number, or maybe it was because I was having problems with the inserted camera which was causing some odd things to happen in the file, fortunately screen capture worked :)

Logged


* January 05, 2017, 12:31:30 PM
#6
Andy, did you use the TCad "Bend Watch" tool in this drawing?

Henry H

Logged


January 05, 2017, 01:00:09 PM
#7
Andy, did you use the TCad "Bend Watch" tool in this drawing?

Henry H

Only if he took the time to find it!

Regards Tim

Logged
You can design without engineering, but you cannot engineer without design.
Testing/using with Win 10 and various TurboCAD 64-bit versions.


* January 05, 2017, 01:24:19 PM
#8
Andy, did you use the TCad "Bend Watch" tool in this drawing?
Henry H

Only if he took the time to find it!

:) no bending at all, use 3D splines to get the bent shapes.




Logged


* January 07, 2017, 04:58:10 PM
#9
Very surealistic...but sharp in detail...!

Logged


January 08, 2017, 02:25:34 PM
#10
Reminds me of my Hippie days . . .

Logged
RMc____
In preparing for battle, planning is essential, but plans are useless . . . Dwight David Eisenhower
v 19.2 Pro Platinum 64 bit
v 14.2 Pro
Turbo Floor Plan Pro v 15
Windows 10 x 64 Home


January 13, 2017, 12:09:23 AM
#11
I like it.  Playground of the Stoned Gods' Children or somesuch.

Jeff

Logged
TC Pro Platinum 2017, 2016 & 2015 (all with LightWorks) & V21
System: i7-5820K @ 3.30GHz, ASRock X99 Extreme4, 16GB DDR4-2133 RAM, Gigabyte GTX 970, Samsung NVMe SSD 950 (256GB), Windows 7 Pro (64-bit) SP1


January 13, 2017, 01:53:27 PM
#12
Not sure why that's an unusual use to TC Andy...or should I now address you as Salvador :) Either way nice work of art!

Logged
Thanks,
Dave Taylor
TurboCAD Product Manager