TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Be sure your post is relevant to the current discussion.  Create a new topic within the appropriate board if you are unsure.

Model Dynamo Series
Read 523 times
November 22, 2016, 05:23:45 PM
I have uploaded a new video series presenting the creation of this model dynamo in TurboCAD Pro Platinum. It is based on a video machining series by the famed Lyle Peterson (aka mrpete222, aka Tubalcane). Lots of interesting stuff to see on his videos if you are an armchair machinist like me.

Model Dynamo Part 1 Base DBC
https://www.youtube.com/watch?v=90YoGMM7ef0

Model Dynamo Part 2 Stator DBC
https://www.youtube.com/watch?v=nnagaCQ-Lwk

Model Dynamo Part 3 Rotor DBC
https://www.youtube.com/watch?v=hubOYSvGJ6Y

Model Dynamo Part 4 Windings DBC
https://www.youtube.com/watch?v=RpTRlECNGFQ

Model Dynamo Part 5 Commutator Assy DBC
https://www.youtube.com/watch?v=_R0Ykv7D4_4

Model Dynamo Part 6 Bearings DBC
https://www.youtube.com/watch?v=Nmq07TDTDW8

Model Dynamo Part 7 Spacers and Lift Ring DBC
https://www.youtube.com/watch?v=sfgez3ZNFG8

Model Dynamo Part 8 Brushes DBC
https://www.youtube.com/watch?v=4mQ_Gu2E2G4

Model Dynamo Part 9 Pulley DBC
https://www.youtube.com/watch?v=mcOt2p9mplU

Model Dynamo Part 10 Lamp DBC
https://www.youtube.com/watch?v=tufKpfxsXB4

Model Dynamo Part 11 Holes and Fasteners DBC
https://www.youtube.com/watch?v=ftM3ZLodcRM

Model Dynamo Part 12 Lamp Wiring DBC
https://www.youtube.com/watch?v=dmQk6R0VVd8

Model Dynamo Part 13 Chamfer and Fillet DBC
https://www.youtube.com/watch?v=UKD1GrRZt5Y

Model Dynamo Part 14 Named Views DBC
https://www.youtube.com/watch?v=sF-GqmgkWv8

Model Dynamo Part 15 Materials DBC
https://www.youtube.com/watch?v=eTw_un5cejE

Model Dynamo Part 16 Luminance and Environment
https://www.youtube.com/watch?v=SYDrGaWgfwQ

Model Dynamo Part 17 Exploded View DBC
https://www.youtube.com/watch?v=TeVxSDsVutM

Model Dynamo Part 18 Paper Space
https://www.youtube.com/watch?v=HVnlWLmBkP0
« Last Edit: November 25, 2016, 03:59:37 PM by Don Cheke »

Logged


* December 02, 2016, 08:40:05 AM
#1
I made it through all the videos and learned a few tricks. There are very few Turbocad videos out so a big thanks to you Don for taking time to put this on YouTube. Excellent work!

Logged
TC 14 pro,  TC 18 platinum,  TC 2015 platinum. 3 s10's and an s4


* December 02, 2016, 12:16:27 PM
#2
lovely, Thanks Don!!

Logged