TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Be sure your post is relevant to the current discussion.  Create a new topic within the appropriate board if you are unsure.

Dxf file to plane to extrude
Read 1432 times
* January 12, 2016, 04:38:40 PM
I have Mac Pro turbo cad and I have dxf files for cutting wood to make wood Cnc clocks I bought a 3D printer imported the file to turbo cad and all I need to do is extrude to a width of 4mm or z to 4mm. There is ten files or clock gears some will extrude others will not. I believe that the gear points are not connected to be a one piece gear to extrude. I am lost. When you zoom in you can see the construction points where he designed the gears. Any ideas.


* January 12, 2016, 10:03:29 PM
re: I have Mac Pro TurboCAD…

You should ask this question in the TurboCAD Mac Forum; it's mostly Windows users in here.

John R.

V17—V21, 2015, 2016, 2017
Designer, Deluxe, Expert, Basic, Platinum
RedSDK enabled
Windows 10, 64-bit

* September 10, 2016, 07:00:14 AM
I tried extrude on a dxf in pro plat 21 in win 10 and it worked. Sometimes you have to try a lot of times before the 3d circuts in a computer start to work.