TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
When posting a problem be sure to include which version you are using.  Give as much information as possible.  If the problem is with a specific file be sure to attache it to your post.

Arrow tool
Read 1352 times
February 28, 2014, 03:20:55 AM
Using TC pro pla, i'd tried to use arrow tool for tail and head it the same elements.
why?

Logged
Architect living in Mali ( West Africa)
Turbocad from TC3 to TC pro Plat 2017 user
www.quarc-design.com


* February 28, 2014, 10:12:32 AM
#1
Are you referring to the new "Arrow Entity" tool in V21 or the Leader tool? Arrow tools have their own Properties separate from Dimensions and you should be able to specify Head & Tails separately.

Logged
John R.

V17—V21, 2015—2018
Designer, Deluxe, Expert, Basic, Platinum
RedSDK enabled
Windows 10 Pro, 64-bit


March 03, 2014, 10:35:03 AM
#2
Dear JOHN

I'm speaking about tails, tails must be plain line, dot line and, ... But when you want to choose tail you have the sames heads of arrow like for heads.
Try please. Can you show picture in your answer?.
Best regards.

Logged
Architect living in Mali ( West Africa)
Turbocad from TC3 to TC pro Plat 2017 user
www.quarc-design.com


* March 03, 2014, 11:53:35 AM
#3
This is what I get with one of the Arrow Entity tools.

Logged
John R.

V17—V21, 2015—2018
Designer, Deluxe, Expert, Basic, Platinum
RedSDK enabled
Windows 10 Pro, 64-bit


* March 03, 2014, 12:38:24 PM
#4
There is a "User Defined" option, which allows you to draw your own. Format it as a Block and it'll be available.

Henry H

Logged


March 03, 2014, 04:02:54 PM
#5
Thank you all. Now i've handerstood.

Logged
Architect living in Mali ( West Africa)
Turbocad from TC3 to TC pro Plat 2017 user
www.quarc-design.com