TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
All posts discussing pricing or where to buy TurboCAD will be deleted.

Furniture Maker V14
Read 3478 times
February 16, 2014, 07:14:29 AM
Do any of you have this and use it?
Does it still place/switch door graphics off a hidden layer?
Resizing - does it now work with solids/boxes etc. rather than having to be surfaces?

Logged
Daz...
V2016 64-Bit & 32 Bit Platinum Edition - Build 61.2
RedSDK Only in 64 bit & 32 bit = RedSDK & Lightworks
TurboCAD user since V3 and Turbocad 3D V1.
OS Windows7 Pro 64bit Lenovo W701 Laptop, 12GB Ram, 2 x 128 SSD harddrives, NVIDIA Quadro FX 2800M Graphics, Intel i7 CPU...


February 20, 2014, 10:57:58 AM
#1
Anyone listening???  :o

Logged
Daz...
V2016 64-Bit & 32 Bit Platinum Edition - Build 61.2
RedSDK Only in 64 bit & 32 bit = RedSDK & Lightworks
TurboCAD user since V3 and Turbocad 3D V1.
OS Windows7 Pro 64bit Lenovo W701 Laptop, 12GB Ram, 2 x 128 SSD harddrives, NVIDIA Quadro FX 2800M Graphics, Intel i7 CPU...


* April 10, 2014, 02:20:20 PM
#2
Listening yes -- but have not upgraded...

Maybe this summer...

Logged
WillR
SW:TC 21 Pro Platinum, FM15, 20 Pro Platinum 64 Bit, also V 19.1 64Bit & 32 bit 17.2 and 18.1; Furniture Maker 14 and 10. HW: Vista 64 Ultimate, AMD 1090 (6 core) 8GB memory Plus also an AMD  8 core systemFX


April 27, 2014, 08:04:11 AM
#3
I would love to see a sample / work in Furniture Maker.
Done recently if that is at all available.
 :D

Logged


* October 24, 2014, 11:06:53 AM
#4
I have finally received my FM 14 and am back in the office.

I will try to report on FM 14 asap -- but I am working through and industrial design course and a engineering SaaS course so I am up to my eyeballs -- however I do have to get a workstation designed -- so...

Logged
WillR
SW:TC 21 Pro Platinum, FM15, 20 Pro Platinum 64 Bit, also V 19.1 64Bit & 32 bit 17.2 and 18.1; Furniture Maker 14 and 10. HW: Vista 64 Ultimate, AMD 1090 (6 core) 8GB memory Plus also an AMD  8 core systemFX


* December 09, 2014, 08:32:18 AM
#5
I have installed FM15 (Ordered FM14, Got FM15 according to the "About" dialog)


It seems to be working -- much fewer bugs than before.


I have designed and optimized a cabinet designed from scratch and printed some working documents for a manual build.


They desperately need a native English speaker and a User Interface designer.


One problem I need to solve fairly quickly is to determine how to force the program to use "off-cuts" -- it seems that DAEX (The Optimizer) will always grab the biggest sheets of material first.


I determined how to put Items in inventory and adjust it to a starting position. However, assigning colors to cabinets and to materials is not a stellar user experience.


I will try to put up a post with a decent review.

Logged
WillR
SW:TC 21 Pro Platinum, FM15, 20 Pro Platinum 64 Bit, also V 19.1 64Bit & 32 bit 17.2 and 18.1; Furniture Maker 14 and 10. HW: Vista 64 Ultimate, AMD 1090 (6 core) 8GB memory Plus also an AMD  8 core systemFX


December 09, 2014, 12:49:35 PM
#6
Hi Will

Is it still using the hidden layer method for door styles?

Logged
Daz...
V2016 64-Bit & 32 Bit Platinum Edition - Build 61.2
RedSDK Only in 64 bit & 32 bit = RedSDK & Lightworks
TurboCAD user since V3 and Turbocad 3D V1.
OS Windows7 Pro 64bit Lenovo W701 Laptop, 12GB Ram, 2 x 128 SSD harddrives, NVIDIA Quadro FX 2800M Graphics, Intel i7 CPU...


* December 15, 2014, 12:58:22 PM
#7
I will check today or tomorrow. But, I think so.


Logged
WillR
SW:TC 21 Pro Platinum, FM15, 20 Pro Platinum 64 Bit, also V 19.1 64Bit & 32 bit 17.2 and 18.1; Furniture Maker 14 and 10. HW: Vista 64 Ultimate, AMD 1090 (6 core) 8GB memory Plus also an AMD  8 core systemFX