TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Be sure your post is relevant to the current discussion.  Create a new topic within the appropriate board if you are unsure.

V.20 Update
Read 1683 times
* November 08, 2013, 06:50:49 AM
I have V.20 with patch 20.1.43.4 and tried to update patch 20.2.51.3, but I get an error message shown in the attached. Is this patch a problem?

Thanks,

Don

Logged
DonCW

2017 Platinum
Light Works Plug in
Windows 10
There's so much to learn and not much time left to learn it.


* November 08, 2013, 12:51:13 PM
#1
You could download the full program and do a complete reinstall. I think that's what users are doing when encountering this problem.

Pro 32-bit: http://downloads.imsidesign.com/ESD/04TCP5202_TurboCAD_Pro_20-2_51-3_x86.exe

Pro 64-bit: http://downloads.imsidesign.com/ESD/04TCP5202_TurboCAD_Pro_20-2_51-3_x64.exe

Logged
John R.

V17V21, 2015, 2016, 2017
Designer, Deluxe, Basic, Platinum
RedSDK enabled
Windows 10, 64-bit


* November 08, 2013, 01:28:21 PM
#2
You could download the full program and do a complete reinstall. I think that's what users are doing when encountering this problem.

Pro 32-bit: http://downloads.imsidesign.com/ESD/04TCP5202_TurboCAD_Pro_20-2_51-3_x86.exe

Pro 64-bit: http://downloads.imsidesign.com/ESD/04TCP5202_TurboCAD_Pro_20-2_51-3_x64.exe

Okay...Thanks John.

Logged
DonCW

2017 Platinum
Light Works Plug in
Windows 10
There's so much to learn and not much time left to learn it.