TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Be sure your post is relevant to the current discussion.  Create a new topic within the appropriate board if you are unsure.

yellow Reference Point
Read 1005 times
* June 07, 2013, 05:04:37 PM
        
      Hello to All
                 I am selecting a part in TC 18.1 and on one part the yellow reference point is not showing up, only the four blue squares  are showing.
 Where is it .
Hilmar...

Logged


* June 07, 2013, 05:19:57 PM
#1
With the part still selected right mouse to open the Local Menu and select Default Reference Point. That should do it. The yellow reference point should re-locate it self to the centre of the highlited part.
« Last Edit: June 07, 2013, 06:08:36 PM by DonCW »

Logged
DonCW

2017 Platinum
Light Works Plug in
Windows 10
There's so much to learn and not much time left to learn it.


* June 07, 2013, 07:07:19 PM
#2

   Yes,  thank You  Don C W
Hilmar

Logged


* June 07, 2013, 07:21:04 PM
#3
You're welcome.

Logged
DonCW

2017 Platinum
Light Works Plug in
Windows 10
There's so much to learn and not much time left to learn it.