TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Interested in some really terrific mobile apps? Visit www.turboapps.com for details.

CAM Lathe
Read 2334 times
December 14, 2012, 08:50:51 AM
I just got a question about TurboCAD CAM can be used for lathe.
My answer was yes.
Here's a 2 minutes video.
http://www.turbocad.no/videoerTCPP19/cam_dreie/

Does anyone have experience with the lathe?

Logged
Kai Sannes, DAKnor. Norwegain TurboCAD seller and instructor.
Laptop Acer Aspire VN7-793G
GeForce GTX1060, 6Gb,Core i7-7700HQ,16GB RAM,256GB PCIe SSD,1TB HDD,W10 Home
17.3" Full HD matt


* December 14, 2012, 08:34:19 PM
#1
I made a sample video for Lathe.Hope it will help.Along with a little video attach at Youtube

http://www.youtube.com/watch?v=_YgTAYDZoYg

Logged
Even a mistake may turn out to be the one thing necessary to a worthwhile achievement Henry Ford
If I have ever made any valuable discoveries it has been owing more to patient attention than to any other talent Isaac Newton
I have not failed Ive just found 10,000 ways that won't work Thomas Edison


December 15, 2012, 11:35:06 AM
#2
Very good video again. I learn very much of this.

Why are you using TCP v11?
I download your file, and drag it into TCPP19. See image.

Kai
« Last Edit: December 15, 2012, 12:37:47 PM by KS »

Logged
Kai Sannes, DAKnor. Norwegain TurboCAD seller and instructor.
Laptop Acer Aspire VN7-793G
GeForce GTX1060, 6Gb,Core i7-7700HQ,16GB RAM,256GB PCIe SSD,1TB HDD,W10 Home
17.3" Full HD matt


* December 15, 2012, 01:53:31 PM
#3
Hey Kai

I use V.11.2 because the file can be open in any version above 11.2 so most end users can benefit from it.If I did in newer version it has a degree of opening restrictions.I also have my animation plug-in working in that version as well.I plan in making one more with thread and groove operations so you can look over that as well in the future.I have it started but not finish it.Thanks for the kind complements in your other posting.Also thanks Ken to you as also.I hope you guys have a pleasant and safe holidays. 8)

w.d.

EDIT: I forgot to mention are my files opening ok at your end?  TIA
« Last Edit: December 15, 2012, 01:55:25 PM by wd »

Logged
Even a mistake may turn out to be the one thing necessary to a worthwhile achievement Henry Ford
If I have ever made any valuable discoveries it has been owing more to patient attention than to any other talent Isaac Newton
I have not failed Ive just found 10,000 ways that won't work Thomas Edison


December 15, 2012, 04:26:22 PM
#4
Maybe I misunderstand, because of my bad English, but I try to comment you in red letters.

I use V.11.2 because the file can be open in any version above 11.2 so most end users can benefit from it.
I opend your file in TCPP19.2 Built 54.2 32 bit

If I did in newer version it has a degree of opening restrictions. I also have my animation plug-in working in that version as well.
I also use AL5.2 in TCPP19

I plan in making one more with thread and groove operations so you can look over that as well in the future.
Very good.

I have it started but not finish it.
Thanks for the kind complements in your other posting. Also thanks Ken to you as also. I hope you guys have a pleasant and safe holidays. 8)

w.d.

EDIT: I forgot to mention are my files opening ok at your end?  TIA
Yes I believe so, but what is TIA?

Kai

Logged
Kai Sannes, DAKnor. Norwegain TurboCAD seller and instructor.
Laptop Acer Aspire VN7-793G
GeForce GTX1060, 6Gb,Core i7-7700HQ,16GB RAM,256GB PCIe SSD,1TB HDD,W10 Home
17.3" Full HD matt