TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Interested in some really terrific mobile apps? Visit www.turboapps.com for details.

Two videos
Read 1826 times
November 30, 2012, 02:54:18 PM
I have put me well into TurboCAD CAM now, and has made ​​two video tests.
But I still know little about CNC. It seems funny.

I am impressed that one can set paths and heights and everything else in popoerty field and be able to move the order of operations.
It works much the same way as Part Tree.
Simlatoren was cool.

Video 1. - 10 minutes How to use TC CAM?
www.turbocad.no/videoerTCPP19/cam/

Video 2. - 4. minutes. Property
www.turbocad.no/videoerTCPP19/cam2/

Kai Sannes

Logged
Kai Sannes, DAKnor. Norwegain TurboCAD seller and instructor.
Laptop Acer Aspire VN7-793G
GeForce GTX1060, 6Gb,Core i7-7700HQ,16GB RAM,256GB PCIe SSD,1TB HDD,W10 Home
17.3" Full HD matt


December 03, 2012, 04:19:50 PM
#1
This is cool, and TurboCAD CAM is much better than I had thought.
It is only the lack of video tutorials that are missing. The videos to CadCourse was very good, but it should have been made more.

Here I first drew a complicated model. Image no 01
Then I used TCCAM and made the part around the model to sputter out from.
I use the same size for xyz as the hole model.

The model is solid, and I was not able to retrieve contours directly from this, but
I discovered that the tool Unfold Face was easy and good for this.

Does somebody have a better way to do it, so let me know.

Kai Sannes :)
« Last Edit: December 03, 2012, 04:26:12 PM by KS »

Logged
Kai Sannes, DAKnor. Norwegain TurboCAD seller and instructor.
Laptop Acer Aspire VN7-793G
GeForce GTX1060, 6Gb,Core i7-7700HQ,16GB RAM,256GB PCIe SSD,1TB HDD,W10 Home
17.3" Full HD matt