TurboCAD Forums

Turbo Talk => General Discussion => Topic started by: MARK TYLER on August 09, 2012, 01:57:52 PM

Title: 1/4 turn stairs in pro plat 19
Post by: MARK TYLER on August 09, 2012, 01:57:52 PM
does anyone know if 1/4 turn stairs are working yet in pro plat 19?
ie. can you set the no. of rises to turn through?
i am trying to draw in 3d , 3 rises up then turn 90 deg in 2 rises(winders in uk) , then 7 rises straight
this has to be accurate as i have to make this in english oak (expensive timber)
any help would be greatly appreciated.

thanks

mark

fustrated & using tc 18 pro plat
Title: Re: 1/4 turn stairs in pro plat 19
Post by: nikkipollard on August 12, 2012, 07:32:08 AM
I battled with these in 18 changing the turn type to 1/4 landing worked in 18
Title: Re: 1/4 turn stairs in pro plat 19
Post by: Dean on August 13, 2012, 01:26:36 PM
Nope, still doesn’t work. See picture below.
Title: Re: 1/4 turn stairs in pro plat 19
Post by: MARK TYLER on August 20, 2012, 01:49:47 PM
thanks both.
it seems that tcad isnt developed for real world applications  ???
 >:(