TurboCAD Forums

Plug-In Palace => CAM => Topic started by: grantmackay80 on July 07, 2012, 11:26:54 AM

Title: Problem with Path Milling on TC v14.2
Post by: grantmackay80 on July 07, 2012, 11:26:54 AM
Hi there, I am having a problem with path milling. I use Turbocad regularly to create toolpaths for engraving but today using a drawing I always use I tried to select path milling and when I try to select the tool path the prompt says define new position for Relative/Polar origin. I have selected and milled this many times with no problems and I always choose not to save changes when closing the file so there should be no change, I also tried to select a toolpath in another drawing and the same prompt appears. Thanks for your time Grant
Title: Re: Problem with Path Milling on TC v14.2
Post by: wd on July 07, 2012, 12:09:23 PM
Would choosing your Mode to Absolute make difference?
Title: Re: Problem with Path Milling on TC v14.2
Post by: Kenneth Martin on July 07, 2012, 09:04:05 PM
Actually, I had this problem once & set my mode to relative coordinates & that solved it for me.
Title: Re: Problem with Path Milling on TC v14.2
Post by: grantmackay80 on July 08, 2012, 12:30:23 AM
Thats done the trick I toggled between the 2 and it works again. Thanks lots Im in production again, G.
Title: Re: Problem with Path Milling on TC v14.2
Post by: Kenneth Martin on July 08, 2012, 06:24:09 AM
Great news. What are you building?