TurboCAD Forums

Turbo Talk => Problems => Topic started by: lcemoore on November 07, 2018, 07:21:55 PM

Title: 2D Boolean tools missing after Build 49 installed
Post by: lcemoore on November 07, 2018, 07:21:55 PM
After TC25, build 49 was installed, the 2D Boolean tools have disappeared from the modify menu.  They are not listed in the list of commands and are not available on any palette that I have looked at.  I restored default settings and still no 2D Boolean tools.
What could have caused this and how to I restore these tools.

Thanks
Title: Re: 2D Boolean tools missing after Build 49 installed
Post by: Henry Hubich on November 07, 2018, 07:32:04 PM
Are you sure they're not where shown in the attached screenshot?

Henry H
Title: Re: 2D Boolean tools missing after Build 49 installed
Post by: John R on November 07, 2018, 08:51:42 PM
I found them in all Editions of 2018, Build 49.0.
Title: Re: 2D Boolean tools missing after Build 49 installed
Post by: Huma IMSI on November 08, 2018, 02:15:57 AM
CNR they are available in both "Modify" menu and in commands also in toolbars see image "1".
Title: Re: 2D Boolean tools missing after Build 49 installed
Post by: Andy H on November 08, 2018, 03:12:30 AM
If it is still not available after checking the above posts. 

I have had numerous problems with TC patches in the past.  Did you it install the patch via the 'check for updates' function within TC (which is faulty on my machine), or did you download and install.  (I did the download and install)

As you have already tried restore default, the first thing to try is delete the built in folder.   Instructions here.  (http://forums.turbocad.com/index.php/topic,9797.0.html)