TurboCAD Forums

Turbo Talk => Problems => Topic started by: pjd1001 on November 05, 2018, 12:39:19 PM

Title: Splines not visible on drawing
Post by: pjd1001 on November 05, 2018, 12:39:19 PM
Hi all,

I'm annotating a plan and when drawing splines, they are not visible. I don't know if it's a scaling issue but if someone could have a quick look and let me know what's going on I'd be grateful.

Many thanks

Phil
Title: Re: Splines not visible on drawing
Post by: Tim Stewart on November 05, 2018, 01:27:42 PM
Hi Phil,

I'm not sure why you would want to use splines when annotating.
However, splines do not disappear, for me, when I apply them to your drawing.

I did notice the attached error message when I first opened your file in PP 2018.

Regards Tim
Title: Re: Splines not visible on drawing
Post by: Henry Hubich on November 05, 2018, 01:28:58 PM
The objects in the drawing are so distant from the World coordinate origin that TCad can't operate properly. Press Ctrl+A to select everything and then set Pos X and Pos Y both to zero. That cured the problem in my v2018 PP installation.

Henry H
Title: Re: Splines not visible on drawing
Post by: pjd1001 on November 05, 2018, 01:36:05 PM
Hi Henry,

Many thanks! That's sorted it.

All the best

Phil
Title: Re: Splines not visible on drawing
Post by: Henry Hubich on November 05, 2018, 02:06:08 PM
Hi Henry,

Many thanks! That's sorted it.

All the best

Phil

Glad to help.

Henry H