TurboCAD Forums

Turbo Talk => General Discussion => Topic started by: eeetee on October 12, 2018, 11:27:03 AM

Title: TC2018 Pro Platinum will not drraw shapes
Post by: eeetee on October 12, 2018, 11:27:03 AM
Hello again,
I just opened a new drawing from a template that I've used for years and nothing seemed out of the ordinary. I selected draw rectangle from the toolbar and it simply will not draw. I have changed shapes and layers with no avail. Anyone have any insights?

Thanks in advance
Ed
Title: Re: TC2018 Pro Platinum will not drraw shapes
Post by: Torfinn on October 12, 2018, 11:37:23 AM
Is it on a layer that are off, and you maybe have closed the warning
Do you have correct workplane to actually see it
Do you set both corner of a rectangle
Are you in Hidden line mode

Is the problem the same in a New from scratch drawing

Torfinn
Title: Re: TC2018 Pro Platinum will not drraw shapes
Post by: eeetee on October 13, 2018, 10:36:28 AM
Thanks for your reply Torfinn! I tried switching layers and changing the work-plane. There is nothing at all drawn. I'll try on my other computer and see if the problem is local to this. It is with a new drawing. which I tried a few different templates.
Thank you again!

Ed