TurboCAD Forums

Turbo Talk => Problems => Topic started by: mattygreen on January 10, 2018, 09:28:48 AM

Title: Image always comes to the front
Post by: mattygreen on January 10, 2018, 09:28:48 AM
I have a model and an image.
Whichever direction I view it the image is always in front, even when I spin dynamically it goes round so far then image to the front again.
Thanks folks
Title: Re: Image always comes to the front
Post by: Alvin Gregorio on January 10, 2018, 01:13:48 PM
I have a model and an image.
Whichever direction I view it the image is always in front, even when I spin dynamically it goes round so far then image to the front again.
Thanks folks

I suggest trying using Layer Order.  Assign a lower Layer Order to the "Images" (or otherwise appropriately named) Layer than the other Layers. (or vise-versa-- the "Images" Layer(s) Order can be 0, and all the others something higher).

I think that'd have the best chance of working to attend to what you are describing.  -Alvin
Title: Re: Image always comes to the front
Post by: Don Cheke on January 10, 2018, 02:26:02 PM
Select the image, press the Shift + Page Down on the keyboard to move the image down - under the lines.
Title: Re: Image always comes to the front
Post by: mattygreen on January 11, 2018, 03:01:54 PM
Thanks folks that helped