TurboCAD Forums

Turbo Talk => Tips and Tricks => Topic started by: NeverStop on July 11, 2017, 01:35:28 PM

Title: Trim a line against ha box ?
Post by: NeverStop on July 11, 2017, 01:35:28 PM
Gents, I actually don't need to! But I want :-)

The pink line I want to trim/cut or adjust to the point highlighted yellow against the 3D box.
This before the sweep operation. I know I can just slice the extra length after... BUT :-)

Title: Re: Trim a line against ha box ?
Post by: John R on July 11, 2017, 09:00:23 PM
Since you already have the workplane established, I would draw a polyline (using Near snap points) along the edges of the Box. Then use that polyline to Trim your ‘pink’ line. Delete the polyline when done.

Another option might be the Line Length (http://www3.turbocadcommunity.com/tiki-index.php?page=Line+Length) tool.