TurboCAD Forums

Turbo Talk => Gallery => Topic started by: Bob on January 04, 2015, 03:50:15 PM

Title: Jacob's Launcher
Post by: Bob on January 04, 2015, 03:50:15 PM
This is a Launcher used today for what we (from the “50’s) would call a "top", got to get to a hobby shop again.
Title: Re: Jacob's Launcher
Post by: Henry Hubich on January 04, 2015, 04:54:01 PM
Very nice, Bob.

Henry H
Title: Re: Jacob's Launcher
Post by: DonCW on January 04, 2015, 04:55:52 PM
This is a Launcher used today for what we (from the “50’s) would call a "top", got to get to a hobby shop again.
Great render Bob.

I remember the top.
Don Circa 1944
Title: Re: Jacob's Launcher
Post by: Bob on January 05, 2015, 05:23:46 AM
Age is really an asset you know everyone wants experience, I have to quietly remind myself that - certainly when I’ll hear the term “old goat:” or “ancient” despairingly remarked. 

The lid is flexed slightly and locks in place the exterior side is flat while the other is concaved. A commercial needle bearing captures the smaller pinion gear so should run faster with ease. 

Nonetheless, does anyone use a 3D Printer Prototype Service I can send a STL file for quote?