Welcome, Guest. Please login or register.
May 16, 2012, 03:47:26 pm
Home Help Search Login Register
News: Be sure your post is relevant to the current discussion.  Create a new topic within the appropriate board if you are unsure.

+  TurboCAD Forums
|-+  Plug-In Palace
| |-+  CAM
| | |-+  TC CAD CAM with a Dynamite Mill		 « previous next »
Pages: [1] Go Down Print
Author Topic: TC CAD CAM with a Dynamite Mill  (Read 942 times)
Steve The Kiwi
Full Member
***
Posts: 131
« on: July 18, 2010, 10:52:01 pm »
As any one used TCC into the above? Anything I need to know? Thanks.
Logged
TurboCadCam 14.2 with CAM & TurboCad 16.2 Pro. without CAM
I support just two teams: Canterbury rugby and any other team playing Auckland and Australia.
kmartin
Beta Tester
Supreme Postmaster
*****
Posts: 1084



WWW
« Reply #1 on: July 19, 2010, 05:43:53 am »
I have a Vortech CNC Router. The only thing I had to do was the modify the Fanuc post processor to suite my needs. Pretty vague, I know, but that was the only thing I had to do. Oh yeah, my router is controlled with Mach3 software controller.
« Last Edit: July 19, 2010, 10:47:29 am by kmartin » Logged
TurboCAD user since v3
V19 Platinum x86 & x64
v18.2.73.1 Platinum CAM Plugin
Windows XP Pro SP3, Windows Vista SP2, Windows 7
Vortech 4 x 8 CNC Router Running with MACH3 Controller
Steve The Kiwi
Full Member
***
Posts: 131
« Reply #2 on: July 19, 2010, 09:39:57 am »
Thanks. Will give it a go using 'Fanuc'.
Logged
TurboCadCam 14.2 with CAM & TurboCad 16.2 Pro. without CAM
I support just two teams: Canterbury rugby and any other team playing Auckland and Australia.
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.059 seconds with 17 queries.