TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
All posts discussing pricing or where to buy TurboCAD will be deleted.

BUG: UI Scale doesn't work
Read 90 times
* February 13, 2019, 09:10:37 PM
In "Tools / Customize", I increase the new "UI Scale" option from 100 to 150%. The Customize dialog and text became larger. After the required 'restart', the dialog is the same large size, but the text has shrunk back to its smaller size. Shouldn't the text remain at the increased size?

V26.0.13.0 (64-bit) Platinum LTE

Logged
John R.

V17—V21, 2015—2018
Designer, Deluxe, Expert, Basic, Platinum
RedSDK enabled
Windows 10, 64-bit


* February 13, 2019, 10:02:01 PM
#1
In "Tools / Customize", I increase the new "UI Scale" option from 100 to 150%. The Customize dialog and text became larger. After the required 'restart', the dialog is the same large size, but the text has shrunk back to its smaller size. Shouldn't the text remain at the increased size?

V26.0.13.0 (64-bit) Platinum LTE
John,
Let me take a look. Are you checking on 4K monitor?.

Logged
Shaheryar Rafiq
SQA Engineer
IMSI Design


* February 13, 2019, 11:51:51 PM
#2
Confirm in Metric as well, normal screen
It did not stick after re-start, next time test i save cfg and menu keep the size but not txt, it did not start automatic second time.

Torfinn

Logged
V18, V19, V20, V21, 2015/ 16/ 17/ 18 Pro. Platinum
Deluxe V20, V21, 2015/ 16/ 17
RedSDK enabled
Windows 10 Home Premium 64 bit, 32 GB
NVIDIA Geforce GTX 780m, 1 GB


* February 14, 2019, 10:08:28 AM
#3
In "Tools / Customize", I increase the new "UI Scale" option from 100 to 150%. The Customize dialog and text became larger. After the required 'restart', the dialog is the same large size, but the text has shrunk back to its smaller size. Shouldn't the text remain at the increased size?

V26.0.13.0 (64-bit) Platinum LTE
John,
Let me take a look. Are you checking on 4K monitor?.

No. My 4k monitors were set at 1920×1080 instead of the recommended 3840×2160. Since they're not going to fix the floating palette issue, I stay at the lower size.

Logged
John R.

V17—V21, 2015—2018
Designer, Deluxe, Expert, Basic, Platinum
RedSDK enabled
Windows 10, 64-bit


* February 14, 2019, 09:52:20 PM
#4
I found when I opened TurboCAD 2018 this evening, everything was very large. So 2019 is affecting 2018. What doesn't work in 2019, works in 2018. When will 2018 & 2019 become separate programs, as 2018 doesn't have the UI Scale feature?

Logged
John R.

V17—V21, 2015—2018
Designer, Deluxe, Expert, Basic, Platinum
RedSDK enabled
Windows 10, 64-bit


* February 14, 2019, 11:26:47 PM
#5
In "Tools / Customize", I increase the new "UI Scale" option from 100 to 150%. The Customize dialog and text became larger. After the required 'restart', the dialog is the same large size, but the text has shrunk back to its smaller size. Shouldn't the text remain at the increased size?

V26.0.13.0 (64-bit) Platinum LTE
Reproduced and reported.

Logged
Shaheryar Rafiq
SQA Engineer
IMSI Design


* February 15, 2019, 02:05:55 PM
#6
Seems to be okay in V26.0.15.4 (64-bit), at both 3840×2160 (4K) & 1920×1080. I kind of hoped it would do something about the height limitation on floating nested palettes, but no change. I can get a palette nest to go 3614 wide out of 3840, but can only get a height of 1145 from 2160. I'm just looking for a 2100 height. Back to the lower resolution. :(

Logged
John R.

V17—V21, 2015—2018
Designer, Deluxe, Expert, Basic, Platinum
RedSDK enabled
Windows 10, 64-bit


February 17, 2019, 06:19:13 AM
#7
Seems to be okay in V26.0.15.4 (64-bit), at both 3840×2160 (4K) & 1920×1080. I kind of hoped it would do something about the height limitation on floating nested palettes, but no change. I can get a palette nest to go 3614 wide out of 3840, but can only get a height of 1145 from 2160. I'm just looking for a 2100 height. Back to the lower resolution. :(

I  never noticed the limitation of the palette 'nest' height and width since I always placed the nest on my 27" 1080 monitor: 1222WX1068H px is the max size I see, that was using Snagit to capture the nest so I could measure it.

Logged
TurboCad V12~V201x Platinum Pro Edition + CAM Plug-In +  Surface Modeling + Survey Coordinates RedSDK
Production: W10 Pro V 1809 OSB 17763.165 I7 12GB NVIDIA Quadro
TC2019 Test Machine Dual Xeon 16GB W10 Pro V 1809 OSB 17763.165 Nvidia Quadro 416.78