TurboCAD Forums

The Ultimate Resource for TurboCAD Knowledge

Register
 
Be sure your post is relevant to the current discussion.  Create a new topic within the appropriate board if you are unsure.

Gears for Animation
Read 566 times
* November 14, 2017, 06:29:46 PM
Like to show a bevel ( spiral ) gear as the drive gear for the animation, I dont have the time do do this now. Has anyone drawn spiral bevel gears that can be used as the basis for the animation or something that I use. Doesnt need to be geometry correct!

see http://forums.turbocad.com/index.php/topic,21879.0.html

Logged
Thanks Daz
TCW V21, 2016 & 2017 PP, Animation Lab V5, Graficalc, TCMap, TurboPDF V2-V3 & Lightworks mostly
Windows 10 Home ed. i7 @ 3400Ghz, 16GB, Nvidia 960GTX 4GB ram, 2TB HD, 500GB SSD & 128GB SSD

Good better best
Never let it rest
Until your good is better
And your better is best


* November 14, 2017, 10:46:13 PM
#1
Try McMaster-Carr. They have some gears available and 3D SAT files that TurboCAD can open.
High-Load Metal Gears for 90 Degree Motion Transfer

Logged
John R.

V17—V21, 2015—2018
Designer, Deluxe, Expert, Basic, Platinum
RedSDK enabled, except in 2018
Windows 10, 64-bit


* November 14, 2017, 11:07:54 PM
#2
Thanks John that will do the trick.

Logged
Thanks Daz
TCW V21, 2016 & 2017 PP, Animation Lab V5, Graficalc, TCMap, TurboPDF V2-V3 & Lightworks mostly
Windows 10 Home ed. i7 @ 3400Ghz, 16GB, Nvidia 960GTX 4GB ram, 2TB HD, 500GB SSD & 128GB SSD

Good better best
Never let it rest
Until your good is better
And your better is best